Free Nokia 4A0-101 Exam Practice Questions & Explanations

Last updated on: Nov 9, 2026
Prepared & Reviewed by the ValidExamDumps Editorial Team

At ValidExamDumps, we consistently monitor updates to the Nokia 4A0-101 exam questions by Nokia. Whenever our team identifies changes in the exam questions, objectives, focus areas or requirements, We immediately update our exam questions for both PDF and online practice exams. This commitment ensures our customers always have access to the most current and accurate questions. By preparing with these up to date and 100% exam domain coverage questions, our customers can successfully pass the Nokia Interior Routing Protocols exam on their first attempt without needing additional materials or study guides.

Other certification materials providers often include outdated or removed questions by Nokia in their 4A0-101 exam. These outdated questions lead to customers failing their Nokia Interior Routing Protocols exam. In contrast, we ensure our questions bank includes only precise and up-to-date questions. Our main priority is your success in the Nokia 4A0-101 exam, not profiting from selling obsolete exam questions in PDF or Online Practice Test.

 

Question 1

A network engineer is configuring route redistribution from OSPF into BGP on an ASBR. The requirement is that only routes from a specific OSPF area, tagged with a particular route tag during redistribution into that area, should be advertised into BGP, while all other OSPF routes should be excluded.

Which configuration approach correctly achieves this filtering requirement?

Answer Options
Correct Answer: A
Explanation

The correct answer is A. Nokia SR OS route policies support matching on protocol, area, and tag values within a policy statement, with accept/reject actions and an implicit or explicit default action. Building an export policy that matches the specific tag and area, accepts those routes, and denies everything else by default is the standard, scalable approach to selective redistribution. Option B is incorrect because OSPF flooding behavior does not control BGP export filtering. Option C is irrelevant since the scenario uses OSPF, not IS-IS, and OSPF does support tag matching in policies. Option D is operationally impractical and does not scale, defeating the purpose of dynamic redistribution.

Question 2

An architect is designing a large multi-area OSPF network for a national backbone. Area 0 will serve as the backbone, with three additional areas connecting to it. During the design review, a team member suggests configuring one of the non-backbone areas as a totally stubby area to reduce the size of the routing table on routers within that area, while still allowing those routers to reach external and inter-area destinations.

Which statement correctly describes the behavior of a totally stubby area in this design?

Answer Options
Correct Answer: A
Explanation

The correct answer is A. In a totally stubby area (a Nokia/Cisco proprietary extension to standard OSPF stub areas), the ABR suppresses both Type 3 (inter-area) and Type 5 (external) LSAs, injecting only a default route so that internal routers rely on the ABR for all destinations outside the area. This significantly reduces LSDB size and routing table entries. Option B describes a standard stub area behavior only partially and is incorrect because totally stubby suppresses Type 3 LSAs too. Option C is false since totally stubby areas apply to non-backbone areas by definition (Area 0 cannot be stubby). Options D and E incorrectly mix in IS-IS behavior, which is unrelated to OSPF area types.

Question 3

A service provider is deploying a dual-stack network where both IPv4 and IPv6 must be routed using OSPFv2 and IS-IS respectively during a migration period. The design team states that OSPFv3 must be used to carry IPv6 routes because OSPFv2 cannot support IPv6, while a single instance of IS-IS can carry both IPv4 and IPv6 routing information using multi-topology or address-family extensions.

Is this statement accurate?

Answer Options
Correct Answer: A
Explanation

The statement is True. OSPFv2 was designed exclusively for IPv4 and cannot natively carry IPv6 prefixes; OSPFv3 is required for IPv6 routing (or OSPFv3 with address families to unify both). In contrast, IS-IS was designed as a protocol-independent link-state protocol and can carry both IPv4 and IPv6 reachability information within a single instance using multi-topology TLVs, making it more flexible for dual-stack transitions without requiring a separate protocol instance for each address family.

Question 4

A network administrator is designing an IPv6 addressing scheme for a new access network. The requirement is to allocate a /48 to a regional site, which will then be subdivided into /64 subnets for individual customer-facing VLANs.

How many /64 subnets can be created from a single /48 allocation?

Answer Options
Correct Answer: C
Explanation

The correct answer is C, 65536. The difference between a /48 and a /64 is 16 bits (64-48=16), and 2^16 = 65,536. This is a standard IPv6 addressing calculation that architects must perform when planning site allocations, since /64 is the standard subnet size for a single LAN segment in IPv6. Options A, B, and D correspond to incorrect bit-difference calculations (8, 12, and 24 bits respectively).

Question 5

A service provider network runs OSPF as the IGP within its core, and a newly acquired region is running IS-IS. The network architect decides to redistribute routes between the two protocols at two separate ASBRs to maintain resiliency, but engineers notice that some prefixes are being learned via a suboptimal path due to a routing loop forming between the two redistribution points.

Which of the following is the most effective way to prevent this redistribution loop between OSPF and IS-IS?

Answer Options
Correct Answer: A
Explanation

The correct approach is A. When redistributing between two protocols at multiple points, routes can be re-advertised back into their original protocol, creating loops or suboptimal paths. Tagging redistributed routes and applying export/import policies that block re-redistribution of tagged routes back into their source protocol is the standard, resilient solution. Removing an ASBR (C) eliminates redundancy, which defeats the design goal. Adjusting reference bandwidth (B) only affects path preference within OSPF, not loop prevention. Changing IS-IS levels (D) affects link-state flooding scope, not redistribution loops.