Free Juniper JN0-1300 Exam Practice Questions & Explanations
Prepared & Reviewed by the ValidExamDumps Editorial Team
At ValidExamDumps, we consistently monitor updates to the Juniper JN0-1300 exam questions by Juniper. Whenever our team identifies changes in the exam questions, objectives, focus areas or requirements, We immediately update our exam questions for both PDF and online practice exams. This commitment ensures our customers always have access to the most current and accurate questions. By preparing with these up to date and 100% exam domain coverage questions, our customers can successfully pass the Juniper Networks Certified Design Specialist exam on their first attempt without needing additional materials or study guides.
Other certification materials providers often include outdated or removed questions by Juniper in their JN0-1300 exam. These outdated questions lead to customers failing their Juniper Networks Certified Design Specialist exam. In contrast, we ensure our questions bank includes only precise and up-to-date questions. Our main priority is your success in the Juniper JN0-1300 exam, not profiting from selling obsolete exam questions in PDF or Online Practice Test.
An architect proposes an EVPN-VXLAN design where VXLAN tunnel endpoints exist only on the spine devices, while the leaf devices perform plain Layer 2 bridging toward the spines. The architect claims this centralized-gateway variant reduces the hardware requirements on the leaf switches.
Statement: In this design the spine devices must still be able to perform VXLAN encapsulation and decapsulation in hardware, and the leaf-to-spine links must carry Layer 2 traffic, which limits the fabric's ability to use a routed ECMP underlay between leaf and spine.
True. If the VTEP function is placed only on the spines, the leaf-to-spine links must transport tenant VLANs at Layer 2 rather than acting as routed point-to-point underlay links. That reintroduces Layer 2 loop-prevention concerns and prevents the clean routed ECMP underlay that a leaf-based VTEP (edge-routed or centrally-routed with leaf VTEPs) design provides, while the spines still require hardware VXLAN encapsulation/decapsulation capability. Modern Juniper reference designs therefore place the VTEP at the leaf layer.
A retail customer has two small data centers, each with a single pair of collapsed core/aggregation switches and roughly 20 access switches. Operations staff is limited, and they want to manage the access layer with as few management points as possible while providing active/active multihoming for dual-homed servers at the access layer.
Which architecture best fits this requirement?
Virtual Chassis Fabric collapses many access/leaf switches into a single logical device with one management point, and LAGs can span member switches so dual-homed servers are active/active without MC-LAG complexity. That matches a small-scale deployment with limited operations staff.
B adds significant per-device configuration and BGP operational skill, which contradicts the requirement for minimal management points at this scale. C removes the Layer 2 multihoming the servers require and still leaves many management points. D increases management burden and blocks links via spanning tree.
During a data center design review, a customer states that all top-of-rack switches must be able to lose a single uplink or a single spine device with no more than a proportional loss of bandwidth and no traffic blackholing. They currently have four spine devices and use EBGP in the underlay with a unique AS number per leaf.
Which underlay design consideration is most important to meet this requirement?
With EBGP and a unique AS per leaf, the paths learned from different spines have different AS paths, so multipath multiple-as is required for the leaf to install all equal-cost next hops. This yields ECMP across all four spines; losing one spine or uplink removes only its share of bandwidth without blackholing.
B deliberately creates an active/standby design, wasting capacity. C would cause routes to be rejected by AS-path loop detection between leaves and is not needed. D slows convergence and increases the chance of blackholing rather than reducing it.
A service provider is designing an EVPN-VXLAN data center fabric that must support multi-tenancy, minimize unknown-unicast flooding, and allow ARP suppression across the fabric. The customer also wants the control plane to scale to hundreds of leaf devices.
Which two design elements support these requirements? (Choose two.)
MP-BGP EVPN provides the control-plane learning of MAC and MAC/IP (Type 2) routes, which enables ARP/ND suppression and dramatically reduces unknown-unicast flooding compared with data-plane flood-and-learn. Using the spines as overlay route reflectors avoids a full mesh of iBGP sessions among hundreds of leaves, which is essential for control-plane scale.
B is the older flood-and-learn approach that increases flooding and does not support ARP suppression. D misuses VNIs, which map to tenant broadcast domains. E reintroduces spanning tree and Layer 2 loops that EVPN-VXLAN is designed to avoid.
A customer is designing a new data center with 12 racks of servers. Each rack requires 40 x 10GbE server-facing ports. The design must support a non-blocking, two-tier IP fabric where any leaf can reach any other leaf in a single hop through the spine layer, and the customer wants to add leaf devices later without re-cabling existing leaves.
Which design characteristic must be satisfied for this IP fabric?
In a Clos-based (spine and leaf) IP fabric, each leaf connects to every spine, and leaves never connect to each other. This gives an equal-cost, single-hop-through-spine path between any two leaves and allows leaf capacity to be added by simply cabling the new leaf to each existing spine.
B and C describe topologies that break the Clos model: leaf-to-leaf and spine-to-spine links are unnecessary and create unequal path lengths. D would eliminate redundancy and ECMP; loop prevention in an IP fabric is handled by Layer 3 routing, not by limiting uplinks.
